Powering Industries Across the Globe.

Yes. We routinely source structural bolts in ISO grades 8.8, 10.9 and 12.9, as well as ASTM A325, A490 and equivalent EN grades. Every lot ships with a mill test certificate and, where the project demands it, third-party inspection reports.

Yes. We source hot-dip galvanised fasteners with coating thickness to ISO 1461 for corrosive environments including coastal and marine sites. Stainless A2 and A4 (AISI 304/316) options are also available where DHG is not preferred.

Standard structural fasteners typically ship in 3–5 weeks including QC. Bespoke anchor bolts, larger diameters, and long-lead castings are 6–10 weeks. We flag long-lead items at quotation so your civil programme is never blindsided.

Yes. We take project-wise BOQs, split the sourcing across the right manufacturers per item, and consolidate everything into a single documented shipment with per-line packing lists — so it lands on site the way your storekeeper wants it.

Yes. Valves to API 600 / 6D / 594 and ASME B16.34; studs and nuts to ASTM A193 B7 / B16 and A194 2H / 4. Every consignment ships with EN 10204 3.1 mill test certificates traceable to the heat number.

Yes. Motorised (24 V / 110 V / 220 V / 380 V) and pneumatic (fail-safe spring-return) actuated valves are bench-tested to your control signal — on/off, 4–20 mA modulating, or Modbus RTU — before dispatch.

Yes. We prepare studs, nuts, washers and gaskets per flange rating and line list, bundled per joint — so site crews are not hunting through a mixed carton at cut-in.

Yes. SGS, TÜV, Bureau Veritas and Lloyd's inspection at works can be arranged against your operator's ITP — visual, dimensional, hydrostatic, and material verification as required.

Yes. Our valve partners produce to API 6D, API 600, API 594, BS 1868 and equivalent standards. Third-party inspection (SGS, TUV, Lloyds, Bureau Veritas) can be arranged at works before dispatch — usually against your operator's ITP.

Yes. All ASTM A193 B7 / B7M / B8 / B8M studs and A194 nuts ship with an EN 10204 3.1 mill test certificate traceable to the heat number, along with a certificate of conformity from our supplier.

Yes. We prepare fastener packages per flange class and line list — studs, nuts, washers, gaskets bundled per joint — so field crews open one bag per joint rather than hunting through a mixed carton.

For sour service we source NACE-compliant materials (B7M studs, 2HM nuts, matching valve trims). NACE-conformance certification is issued with the mill test report where required.

Yes. Send us a physical sample, a scanned drawing, or a photograph with dimensions. We reverse-engineer with the right manufacturer, share a technical drawing back to you for sign-off, then run a paid sample before bulk.

Yes. AISI 304 and 316 wetted-parts, sanitary-finish, and PTFE-lined options are available. Confirm the media, temperature, and any statutory certification you need (FDA, 3-A, etc.) with your enquiry.

General machining routinely holds IT7–IT8; precision work holds IT6 or better where the drawing calls for it. Surface finishes down to Ra 0.8 are standard, with finer where specified.

Yes. A common workflow: you send us a mixed spares list, we split-source across our network, aggregate at our Ahmedabad hub, inspect, pack, and ship as a single consignment with one packing list per PO line.

Yes. Standard flow is paid sampling after PO, first-article inspection with a dimensional report, and sign-off before production. Full PPAP-lite (Levels 2–3) documentation is available when the customer requires it.

Yes. We source in your specified finish, laser-mark or emboss your part number, and pack in your branded cartons or blister packs.

Drop and press forging in carbon and alloy steels (EN8, EN19, EN24, 42CrMo4, SAE 1045), stainless steels, and brass. Weight class from a few grams to ~50 kg. Post-forging heat-treatment, machining, and coatings are available end-to-end.

Yes. Confirm the voltage and frequency with your enquiry (220 V / 50 Hz, 380 V / 50 Hz, etc.). We match motor windings and starters accordingly, and can supply matching control panels if required.

Yes. Stainless-steel wet-end pumps (AISI 304/316) are available for saline and hard-water conditions, along with polypropylene impellers for chemical-tolerance applications.

Yes. We routinely consolidate mixed-rating orders into a single shipment with per-model packing lists — useful for dealers stocking a full range at once.

Yes. Our valve partners hold current approvals from DNV, ABS, Lloyd's Register and Bureau Veritas for their standard range. Classification-witnessed testing at works can be arranged for consignments where the vessel programme requires it.

Yes. CuNi 90/10 and 70/30 valves, fittings and flanges are stocked lines for seawater lines and chilled seawater cooling. Material composition and mechanical test reports ship with every lot.

AISI 316 (A4-80) is standard for deck-mount fasteners; duplex 2205 and super-duplex on order for aggressive marine environments. HDG to ISO 1461 is available for structural bolting where 316 is not specified.

Yes. Rudder fittings, mooring hardware, propeller-shaft components and similar forgings are produced to your drawing after paid sampling and first-article approval, with class-witnessed testing arranged when required.

Yes. PTFE-lined butterfly, ball and diaphragm valves are stocked lines, with PFA and FEP linings on order. Confirm the media, temperature and concentration and we specify the correct liner thickness and body material.

Yes. Alloy-body valves in Hastelloy C276, Alloy 20, duplex 2205 and super-duplex are sourced on order for corrosive and pitting-resistant duty, with mill certification and PMI available.

Yes. Pneumatic and electric actuators with ATEX-certified solenoid pilots, limit switch boxes and positioners are supplied for Zone 1 / Zone 2 classified areas. Confirm the gas group and temperature class at enquiry.

EN 10204 3.1 mill test certificates, hydrostatic test certificates, positive material identification (PMI) where called for, and — for actuated packages — bench-test reports and wiring diagrams per assembly.